Climate Technologies multi-appliance Comfort Control Owner's Manual download pdf (Page 22)

Multi-Appliance Comfort Control

Page 22

Ducted Reverse C

cle

AUTO – PROGRAM MODE

Auto mode is where the Comfort control automatically

operates your unit according to your program settings. The

default sequence is as per the chart. To set your program,

see next section Programming Your Comfort Control.

To operate your unit in AUTO mode, press the

MANUAL/AUTO button, the display will show AUTO (if

operating in MANUAL). The unit will now turn on and off at

specific times and will change operational functions as

programmed.

PROGRAMMING YOUR COMFORT CONTROL

Programming your Comfort Control will provide you with energy and

time savings not to mention the comfort of set and forget air

conditioning. Your air conditioning system will only operate when you

need it, and at your chosen comfort levels.

Determine your most comfortable settings, program them and let your

Comfort Control do the rest automatically.

Programming Sequence

If you've never programmed your Comfort Controller before (or it’s been

a while) remember it's easiest to program the whole week to the same

settings (by selecting the whole week MON TUE WED THU FRI SAT

SUN day choice) and then program variations for particular days or the

weekend as you become more familiar with programming.

If the Controller exits program mode it may be because you've paused

longer than about 15 seconds to make your next choice. All the settings

you've made up to then will be saved. Just switch back to program

mode, scroll through your settings using the ENTER key and carry on

from where you left off.

The following is the programming sequence once the control is turned

on:-

1. To Start Program: Press the SET TIME/PROGRAM button.

PROGRAM 1 and the current day will flash.

2. Selecting the Days / Day Group: Press the ▼ or ▲ arrows to

select the day or day group to be modified. Options are: ‘Single

Day’, ‘MON TUE WED THU FRI’ or ‘SAT SUN’ or ‘MON TUE

WED THU FRI SAT SUN’. Press ENTER to complete the

selection

3. Turning the unit On or Off: Press the ON/OFF button to turn the

unit ON or OFF. At this point the control display will be ON or OFF

and the timer hour number will be flashing.

4. Selecting the Operating Mode: if programmed ON: You can now

select whether you would like your air conditioning system to

operate in heating only or cooling only or heating & cooling

(changeover) modes. Press the HEAT/COOL/FRESH AIR button

to select the operating mode you require, if the mode is already

selected proceed to the next step.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Comments to this Manuals

No comments

Climate Technologies multi-appliance Comfort Control Owner's Manual Page 22

Comments to this Manuals